|
1、Beaing Selection
MSB have developed hinds of earing material According to difference
work comdition. The user can select the material base on bearing
work environment,load,speed,wear resistance request,moving method,installation,the
cost of the material etc.
2、PV=PxV
PV is the product of the specific bearing load P and the sliding
speed V which is very important design date. We recommend design
lower PV value will leads to longer service life. Also don't exceed
the max. of material load, speed, temp. and lower if possible.
3、Installation:
The bearing, housing and fitting tools must be kept clean during
fitting. please give special notice to us if you adopt the soft
material for housing produce. To make fitting easy, the shaft ends
should be chamfered.
|
